United Grinding to showcase advancements in manufacturing

Published
October 31, 2013 - 07:00pm

United Grinding North America, Inc. welcomes manufacturers to its Fredericksburg, Va., facility on Nov. 20 from 8 a.m. to 5 p.m. to experience the latest technology and trends in PCD tool manufacturing, featuring live demonstrations from its WALTER and EWAG brands.  

WALTER and EWAG manufacture grinding, eroding, laser and CNC measuring machines that produce and resharpen cutting tools and parts made from superhard, difficult-to-machine materials such as PCD, CBN, CVD-D, ceramics, cermet, carbide, cobalt chrome and HSS.   

The event also features technical presentations on a wide variety of PCD-related topics, including advancements in PCD tool technology and machining solutions for complex geometries, grinding wheels for superhard materials, superhard material science, advancements in brazing technology and coolant basics. 

Visit www.grinding.com/en/pcd_days for more information or to register for the event.

Related Glossary Terms

  • ceramics

    ceramics

    Cutting tool materials based on aluminum oxide and silicon nitride. Ceramic tools can withstand higher cutting speeds than cemented carbide tools when machining hardened steels, cast irons and high-temperature alloys.

  • computer numerical control ( CNC)

    computer numerical control ( CNC)

    Microprocessor-based controller dedicated to a machine tool that permits the creation or modification of parts. Programmed numerical control activates the machine’s servos and spindle drives and controls the various machining operations. See DNC, direct numerical control; NC, numerical control.

  • coolant

    coolant

    Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.

  • cubic boron nitride ( CBN)

    cubic boron nitride ( CBN)

    Crystal manufactured from boron nitride under high pressure and temperature. Used to cut hard-to-machine ferrous and nickel-base materials up to 70 HRC. Second hardest material after diamond. See superabrasive tools.

  • grinding

    grinding

    Machining operation in which material is removed from the workpiece by a powered abrasive wheel, stone, belt, paste, sheet, compound, slurry, etc. Takes various forms: surface grinding (creates flat and/or squared surfaces); cylindrical grinding (for external cylindrical and tapered shapes, fillets, undercuts, etc.); centerless grinding; chamfering; thread and form grinding; tool and cutter grinding; offhand grinding; lapping and polishing (grinding with extremely fine grits to create ultrasmooth surfaces); honing; and disc grinding.

  • high-speed steels ( HSS)

    high-speed steels ( HSS)

    Available in two major types: tungsten high-speed steels (designated by letter T having tungsten as the principal alloying element) and molybdenum high-speed steels (designated by letter M having molybdenum as the principal alloying element). The type T high-speed steels containing cobalt have higher wear resistance and greater red (hot) hardness, withstanding cutting temperature up to 1,100º F (590º C). The type T steels are used to fabricate metalcutting tools (milling cutters, drills, reamers and taps), woodworking tools, various types of punches and dies, ball and roller bearings. The type M steels are used for cutting tools and various types of dies.

  • polycrystalline diamond ( PCD)

    polycrystalline diamond ( PCD)

    Cutting tool material consisting of natural or synthetic diamond crystals bonded together under high pressure at elevated temperatures. PCD is available as a tip brazed to a carbide insert carrier. Used for machining nonferrous alloys and nonmetallic materials at high cutting speeds.

INDUSTRY NEWS

10/11/2024
GROB Systems Inc., a global supplier of manufacturing systems and machine tools, will host an Aerospace Technology Day, together with industry partners Concepts NREC, Emuge-Franken USA, Open Mind…

10/10/2024
Horizon MIcrotechnologies, a supplier of innovator in hybrid microfabrication solutions, is participating in the upcoming TechBlick Event, "The Future of Electronics RESHAPED," taking place…

10/09/2024
The Association for Advancing Automation’s latest report shows decline in units sold to automotive component suppliers but increased sales in several non-automotive sectors.