U.S. manufacturing tech orders went up 6% in September: AMT

Published
November 14, 2017 - 08:45am

Manufacturing technology orders in September continued their upward trend, ending the third quarter on a strong note. According to the latest U.S. Manufacturing Technology Orders Report, bookings for September 2017 were up 6 percent from August and posted a year-to-date figure 5 percent higher than the first nine months of 2016. The monthly total of $403 million fell short of September 2016 by 26 percent, a typical drop-off in odd-numbered years when IMTS, the largest manufacturing technology show in the Americas, does not occur.

The rough edges of the recovery continued to expose themselves. Aerospace and medical equipment, chief contributors to new capital equipment investment over the past eight months, were down 26 percent and 40 percent respectively from August. Order activity from the automotive industry had been weak during the third quarter but rose 11 percent in September, surprising some analysts who had expected auto orders to remain weak till December.

“While there is recovery in market conditions for manufacturing technology, it’s at a more gradual pace than typically seen due to a sentiment of caution around manufacturing,” said Doug Woods, President of AMT – The Association For Manufacturing Technology. “Manufacturers are concerned about Washington’s impact on economic growth and pace of technological change, as well as the general evolution in technology. It is necessary for companies to invest in current technologies to stay competitive, but they’re doing so at a moderate pace.”

Regionally, the North Central West, Southeast and Northeast regions as reported by USMTO benefited from strong activity in contract machining shops, forging and stamping, automotive, and consumer electronics. Notably, orders from the consumer electronics and computers sector were up 132 percent nationally. The West region also saw gains in September, driven by contract machining shops and regional activity in aerospace.

The key leading indicators for manufacturing technology are positive and AMT analysis suggests an acceleration in order activity at the close of 2017. AMT staff are available to provide further insight on economic and technology trends for the manufacturing industry.

Source: AMT, the Association of Manufacturing Technology

Related Glossary Terms

  • recovery

    recovery

    Reduction or removal of workhardening effects, without motion of large-angle grain boundaries.

  • sawing machine ( saw)

    sawing machine ( saw)

    Machine designed to use a serrated-tooth blade to cut metal or other material. Comes in a wide variety of styles but takes one of four basic forms: hacksaw (a simple, rugged machine that uses a reciprocating motion to part metal or other material); cold or circular saw (powers a circular blade that cuts structural materials); bandsaw (runs an endless band; the two basic types are cutoff and contour band machines, which cut intricate contours and shapes); and abrasive cutoff saw (similar in appearance to the cold saw, but uses an abrasive disc that rotates at high speeds rather than a blade with serrated teeth).

Author

CTE magazine staff
847-498-9100

News items authored by Cutting Tool Engineering have been written or edited by the editors of Cutting Tool Engineering magazine. The reports represent material submitted to CTE by outside authors, and edited by CTE editors for style and accuracy.

INDUSTRY NEWS

03/28/2024
Mazak has joined major cybersecurity research universities and enterprises throughout the country as a collaborative partner with the Cybersecurity Manufacturing Innovation Institute.

03/26/2024
A pilot project for AI-based quality inspection has been successfully launched in the production unit in Šumperk, Czechia. The company said that the project has opened the door to achieving even…

03/22/2024
Hypertherm Associates to award Powermax systems to 12 North American schools as part of Spark Something Great grant program.