LMT Onsrud LP promotes Mark Ware

Published
February 06,2019 - 03:00pm

Mark WareWaukegan, IL - LMT Tools is announcing that Mark Ware has been promoted to Milling and Tapping Application Specialist for LMT Tools.

Mark has over twenty years of manufacturing sales experience and has worked with industrial distribution, machine tool sales, and has extensive knowledge of cutting tool applications. Mark has been with LMT Tools since 2017.

Related Glossary Terms

  • gang cutting ( milling)

    gang cutting ( milling)

    Machining with several cutters mounted on a single arbor, generally for simultaneous cutting.

  • milling

    milling

    Machining operation in which metal or other material is removed by applying power to a rotating cutter. In vertical milling, the cutting tool is mounted vertically on the spindle. In horizontal milling, the cutting tool is mounted horizontally, either directly on the spindle or on an arbor. Horizontal milling is further broken down into conventional milling, where the cutter rotates opposite the direction of feed, or “up” into the workpiece; and climb milling, where the cutter rotates in the direction of feed, or “down” into the workpiece. Milling operations include plane or surface milling, endmilling, facemilling, angle milling, form milling and profiling.

  • tapping

    tapping

    Machining operation in which a tap, with teeth on its periphery, cuts internal threads in a predrilled hole having a smaller diameter than the tap diameter. Threads are formed by a combined rotary and axial-relative motion between tap and workpiece. See tap.