FLP releases new Applitec catalog

January 27, 2015 - 06:00pm
FLP Tooling's Applitec brand has launched its 2015-2017 product catalog with three new product lines added.

FLP Tooling's Applitec brand has launched its 2015-2017 product catalog with three new product lines added: Top-Watch, Trio-Line and Micro-Line. Top-Watch is a line of inserts and holders for micro machining ultrasmall parts, developed in collaboration with Swiss watchmakers. The Trio-Line boasts 3-sided inserts, including a set of grooving inserts for circlips, adhering to DIN 6799 and DIN 471 standards. Lastly, the Micro-Line are micro milling tools including drills, endmills, finishing end mills, engraving mills and NC centering drills. 

 To complement these additions, Applitec has enhanced all other existing lines. For example, new JET holders provide an integrated coolant supply for the Top-Line, Eco-Line and Cut-Line series inserts; 700 series ZXT inserts feature a new chipbreaker design; and Eco-Line and ISO-Line inserts are available with improved coatings.

Related Glossary Terms

  • centering


    1. Process of locating the center of a workpiece to be mounted on centers. 2. Process of mounting the workpiece concentric to the machine spindle. See centers.

  • chipbreaker


    Groove or other tool geometry that breaks chips into small fragments as they come off the workpiece. Designed to prevent chips from becoming so long that they are difficult to control, catch in turning parts and cause safety problems.

  • coolant


    Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.

  • gang cutting ( milling)

    gang cutting ( milling)

    Machining with several cutters mounted on a single arbor, generally for simultaneous cutting.

  • grooving


    Machining grooves and shallow channels. Example: grooving ball-bearing raceways. Typically performed by tools that are capable of light cuts at high feed rates. Imparts high-quality finish.

  • milling


    Machining operation in which metal or other material is removed by applying power to a rotating cutter. In vertical milling, the cutting tool is mounted vertically on the spindle. In horizontal milling, the cutting tool is mounted horizontally, either directly on the spindle or on an arbor. Horizontal milling is further broken down into conventional milling, where the cutter rotates opposite the direction of feed, or “up” into the workpiece; and climb milling, where the cutter rotates in the direction of feed, or “down” into the workpiece. Milling operations include plane or surface milling, endmilling, facemilling, angle milling, form milling and profiling.

  • numerical control ( NC)

    numerical control ( NC)

    Any controlled equipment that allows an operator to program its movement by entering a series of coded numbers and symbols. See CNC, computer numerical control; DNC, direct numerical control.


GEDIA Automotive has ordered an accessibility-adapted press-hardening line from AP&T. The adaptation means that the line will be designed to enable staff with physical disabilities to monitor and…

Sandvik Coromant is expanding operations in Oconee County, South Carolina. The $29.4 million investment will improve the company’s Westminster production facility.

“Why do we do what we do?” asked Alexander Zoller, president of ZOLLER Inc., during his welcome and keynote address on the first day of the two-day ZOLLER Open House & Technology Days, which took…