Ceratizit adds application engineer to Southern Region

Published
October 06, 2023 - 06:45am
Justin Vititoe

Ceratizit welcomes Justin Vititoe as an Application Engineer with an operating base in Tennessee. Vititoe's 24 years of industry experience includes a focus on all aspects of CNC programming, the company says.

Vititoe earned a bachelor's degree in Manufacturing Engineering Technology from East Tennessee State University. As a manufacturing engineer, he has focused on programming in various leading software packages for the production of complex components for industries including aerospace, defense, and power generation.

Along with program development, he also has supported tooling, fixtures, and documentation for 3, 4, and 5-axis CNC milling and turning centers.

"My enthusiasm for our industry is anchored in learning about the wide variety of applications available," Vititoe said. “I use my two decades of applied knowledge to match customers with tooling solutions that are right for them."

Vititoe has built multi-faceted expertise that ranges from complex part design, programming, and production to quality control and customer engagement. 

Related Glossary Terms

  • centers

    centers

    Cone-shaped pins that support a workpiece by one or two ends during machining. The centers fit into holes drilled in the workpiece ends. Centers that turn with the workpiece are called “live” centers; those that do not are called “dead” centers.

  • computer numerical control ( CNC)

    computer numerical control ( CNC)

    Microprocessor-based controller dedicated to a machine tool that permits the creation or modification of parts. Programmed numerical control activates the machine’s servos and spindle drives and controls the various machining operations. See DNC, direct numerical control; NC, numerical control.

  • gang cutting ( milling)

    gang cutting ( milling)

    Machining with several cutters mounted on a single arbor, generally for simultaneous cutting.

  • milling

    milling

    Machining operation in which metal or other material is removed by applying power to a rotating cutter. In vertical milling, the cutting tool is mounted vertically on the spindle. In horizontal milling, the cutting tool is mounted horizontally, either directly on the spindle or on an arbor. Horizontal milling is further broken down into conventional milling, where the cutter rotates opposite the direction of feed, or “up” into the workpiece; and climb milling, where the cutter rotates in the direction of feed, or “down” into the workpiece. Milling operations include plane or surface milling, endmilling, facemilling, angle milling, form milling and profiling.

  • quality assurance ( quality control)

    quality assurance ( quality control)

    Terms denoting a formal program for monitoring product quality. The denotations are the same, but QC typically connotes a more traditional postmachining inspection system, while QA implies a more comprehensive approach, with emphasis on “total quality,” broad quality principles, statistical process control and other statistical methods.

  • turning

    turning

    Workpiece is held in a chuck, mounted on a face plate or secured between centers and rotated while a cutting tool, normally a single-point tool, is fed into it along its periphery or across its end or face. Takes the form of straight turning (cutting along the periphery of the workpiece); taper turning (creating a taper); step turning (turning different-size diameters on the same work); chamfering (beveling an edge or shoulder); facing (cutting on an end); turning threads (usually external but can be internal); roughing (high-volume metal removal); and finishing (final light cuts). Performed on lathes, turning centers, chucking machines, automatic screw machines and similar machines.

INDUSTRY NEWS

07/17/2024
WFL Multifunction Turning and Milling Centers are employed across various industries, with aerospace being a significant market. ArianeGroup, at the forefront of space transportation, stands as a…

07/11/2024
Shipments of cutting tools, measured by the Cutting Tool Market Report compiled in a collaboration between AMT – The Association For Manufacturing Technology and the U.S. Cutting Tool Institute (…

07/08/2024
EXAIR, a leader in engineered compressed air solutions and static elimination, and BETE, an engineered spray nozzle and spraying systems manufacturer, have entered into a definitive merger agreement…