Articles & Columns

One of the Look Ahead features in this month's Cutting Tool Engineering magazine covers a new CBN superabrasive for grinding wheels that extends wheel life and lowers grinding forces.

END USER: The TMF Center, (765) 762-1000 CHALLENGE: Reduce setup and changeover times when machining large parts. SOLUTION: A modular magnetic workholding system. SOLUTION PROVIDER: Techniks Inc., (877) 354-3837, www.techniksusa.com

The Shop Operations column in the December 2011 issue of Cutting Tool Engineering magazine offers some tips when sawing metal.

The Manager's Desk column in the December 2011 issue of Cutting Tool Engineering addresses the importance of developing interest in manufacturing careers.

END USER: Marquardt Engineering Inc., (847) 669-0690, www.marquardt-eng.com. CHALLENGE: Eliminate chatter to prevent indexable inserts from blowing up and causing catastrophic tool body failure when drilling 4150 prehardened steel. SOLUTION: A new drill body and inserts. SOLUTION PROVIDER: Tungaloy America Inc., (888) 554-8394, www.tungaloyamerica.com

Quantifying machine tool error motions in this month's Machine Technology column by Dr. Scott Smith of the University of North Carolina at Charlotte.

The price range for a new presetter is wide—units supplied by sources for this article range from $8,000 to $85,000 or more. But even a lower price model might be difficult for a shop to justify. “It is hard for a shop to see the dollar savings because the presetter doesn’t make any parts,” said Joe Halik, engineering manager for Koma Precision Inc., East Windsor, Conn., the North American importer of Elbo Controlli presetters. “But you have to look at how much time you are wasting by measuring tools on the machine tool and from scrapped parts and operator error.”

Find out more about a cryogenic lubrication technology based on supercritical CO2 in this month's Look Ahead feature.

The Lead Angle editorial by Cutting Tool Engineering Editorial Director Alan Rooks ponders the question, "What inspires people to do their best?"

Another Look Ahead item addresses bagless recycling for waterjet cutting.

END USER: MSI Corp., (724) 567-6500, www.msicorporation.com. CHALLENGE: Effectively cut a large amount of material on older machines without damaging cutting tools. SOLUTION: A milling cutter tooled with inserts that enable a large DOC at a low horsepower. SOLUTION PROVIDER: Sandvik Coromant Co., (800) SANDVIK, www.sandvik.coromant.com/us

Statistical analysis of metalcutting data can help shops select the right indexable insert geometry.

Shop Operations column for the October 2011 issue of Cutting Tool Engineering magazine urges shops to remember to file. Don't overlook filing.

Tools and techniques for engraving 2-D data matrix bar codes on machined metal parts.

Manufacturers large and small develop strategies to quickly redesign and machine new parts for military customers.

Machine Technology column for the October 2011 issue of Cutting Tool Engineering magazine helps find stable machining with the 'super diagram.'

The Look Ahead feature in the October 2011 issue of Cutting Tool Engineering magazine mentions a CNC rotary transfer machine that approaches the productivity of a mechanically controlled machine and can produce microscale parts.

Machinist's Corner column in the October 2011 issue of Cutting Tool Engineering magazine suggests that now is the time to tap into unallocated company funds.

Part Time column for the October 2011 issue of Cutting Tool Engineering magazine visits with an Indianapolis shop that machines robotic mower components.

END USER: Colt Defense LLC, (800) 241-2485, www.colt.com. CHALLENGE: Eliminate concerns about part accuracy and cutting tool runout when machining faster than 9,000 rpm. SOLUTION: A press-fit toolholding system. SOLUTION PROVIDER: REGO-FIX Tool Corp., (800) 999-7346, www.rego-fix.com