VariMill Chip Splitter

November 11, 2021
High-Performance Solid Carbide End Mill

Hanita, a WIDIA brand recently released the VariMill Chip Splitter for dynamic and trochoidal milling operations in steel, stainless steel, and heat-resistant superalloys. The VariMill Chip Splitter delivers higher metal removal rate (MRR) by separating long, undesirable stringy chips from deep cavities and dynamic milling paths by cutting material into shorter, more manageable sections.

This high-performance end mill is designed with non-overlapping chip splitters along the flute cutting edges. The result is more efficient MRR, while maintaining the ability to make finishing passes. The unequally spaced design feature allows each sequential cutting edge to remove any remaining material left by the chip splitter of the previous flute. The tool’s innovative design reduces breakage and makes it versatile enough for both roughing and finishing passes.

“The Hanita VariMill Chip Splitter helps machinists cut faster and longer by enhancing the ability to flush or blow away stringy chips from deep axial cuts, without forming clumps of intertwined swarf. This is very important to avoid re-cutting of chips, which could damage the cutting edges and shorten tool life, Additionally, the ability to rough and finish with the same tool provides great benefit in cycle time and inventory management, both in the tool crib and the machine’s carousel” said Steve George, Senior Manager of Hanita Product Engineering.

VariMillTM Chip Splitter End Mills are available in 5 and 7-flute configuration in 1⁄2”-1” inch standard dimensions in both WP15E and WS15PE grades. The end mill can cut up to 4.5xD; achieving the highest feed-rate per tooth values, significant reduction in radial forces, and consequential improvements to MRR and overall tool life without compromising surface quality. The 5-flute chip splitter maximizes performance needs when machining steel materials and the 7-flute chip splitter excels in machining stainless steel, and heat-resistant superalloys such as 17-4PH, inconel and titanium.

Related Glossary Terms

  • gang cutting ( milling)

    gang cutting ( milling)

    Machining with several cutters mounted on a single arbor, generally for simultaneous cutting.

  • milling

    milling

    Machining operation in which metal or other material is removed by applying power to a rotating cutter. In vertical milling, the cutting tool is mounted vertically on the spindle. In horizontal milling, the cutting tool is mounted horizontally, either directly on the spindle or on an arbor. Horizontal milling is further broken down into conventional milling, where the cutter rotates opposite the direction of feed, or “up” into the workpiece; and climb milling, where the cutter rotates in the direction of feed, or “down” into the workpiece. Milling operations include plane or surface milling, endmilling, facemilling, angle milling, form milling and profiling.

  • milling machine ( mill)

    milling machine ( mill)

    Runs endmills and arbor-mounted milling cutters. Features include a head with a spindle that drives the cutters; a column, knee and table that provide motion in the three Cartesian axes; and a base that supports the components and houses the cutting-fluid pump and reservoir. The work is mounted on the table and fed into the rotating cutter or endmill to accomplish the milling steps; vertical milling machines also feed endmills into the work by means of a spindle-mounted quill. Models range from small manual machines to big bed-type and duplex mills. All take one of three basic forms: vertical, horizontal or convertible horizontal/vertical. Vertical machines may be knee-type (the table is mounted on a knee that can be elevated) or bed-type (the table is securely supported and only moves horizontally). In general, horizontal machines are bigger and more powerful, while vertical machines are lighter but more versatile and easier to set up and operate.

  • superalloys

    superalloys

    Tough, difficult-to-machine alloys; includes Hastelloy, Inconel and Monel. Many are nickel-base metals.

  • swarf

    swarf

    Metal fines and grinding wheel particles generated during grinding.

Additional Products from WIDIA

With positive feedback from pre-launch customers, new high-performance WIDIA Victory turning grades reportedly deliver increased productivity with improved surface finishes and longer tool life across steel, stainless steel, cast irons, and specialty alloys.

Born from the success of WIDIA's VariMill I and VariMill II end mills, the VariMill II ER end mill offers the performance of its predecessors but with features that enhance stability.

WIDIA can now offer customers the SAFE-LOCK system by Haimer.

WIDIA has announced the M200 copy mill as its latest addition to the WIDIA Victory line of tooling.

Successful high-feed milling is characterized as using small depths of cut at high federates per tooth, with the result being higher metal-removal rates and increased productivity. As opposed to traditional milling, high-feed milling generates lower radial cutting forces, making it an attractive…

From its advanced VDS point geometry designed to reduce chipping on the cutting edge to its precision shank engineered for low runout, the WIDIA VariDrill is a new multi-application drill engineered to deliver acceptable hole finish and extended tool life across a wide range of materials, including…

In deep-hole drilling applications up to 30XD, new solid-carbide WIDIA-Rubig deep-hole drills reportedly remove between three and four times the metal compared to gun drills, in addition to delivering excellent hole quality and cycle times.

Widia has added tool bodies and inserts to its Victory M1200 series for facemilling steel, stainless steel, high-strength steel, cast iron and nonferrous materials.

Where applications demand precise thread quality and improved threadmaking productivity, Widia offers its new high-performance WIDIA-GTD HSS-E taps.

The WIDIA Victory Top Drill M1 modular drills feature a solid coupling for consistent performance from insert to insert and easy insert change on the machine because of a front-clamping mechanism.