Only One Focus: Getting the Job Done

Published Date
January 10,2020 - 06:30:am

Related Glossary Terms

  • high-speed steels ( HSS)

    high-speed steels ( HSS)

    Available in two major types: tungsten high-speed steels (designated by letter T having tungsten as the principal alloying element) and molybdenum high-speed steels (designated by letter M having molybdenum as the principal alloying element). The type T high-speed steels containing cobalt have higher wear resistance and greater red (hot) hardness, withstanding cutting temperature up to 1,100º F (590º C). The type T steels are used to fabricate metalcutting tools (milling cutters, drills, reamers and taps), woodworking tools, various types of punches and dies, ball and roller bearings. The type M steels are used for cutting tools and various types of dies.

  • milling machine ( mill)

    milling machine ( mill)

    Runs endmills and arbor-mounted milling cutters. Features include a head with a spindle that drives the cutters; a column, knee and table that provide motion in the three Cartesian axes; and a base that supports the components and houses the cutting-fluid pump and reservoir. The work is mounted on the table and fed into the rotating cutter or endmill to accomplish the milling steps; vertical milling machines also feed endmills into the work by means of a spindle-mounted quill. Models range from small manual machines to big bed-type and duplex mills. All take one of three basic forms: vertical, horizontal or convertible horizontal/vertical. Vertical machines may be knee-type (the table is mounted on a knee that can be elevated) or bed-type (the table is securely supported and only moves horizontally). In general, horizontal machines are bigger and more powerful, while vertical machines are lighter but more versatile and easier to set up and operate.

The video proves the point—YG-1’s ONLY ONE end mill provides superior cutting performance to cut where others can’t.  Watch how coated carbide breaks down halfway through the cut and witness how HSS CO8 can’t stand the heat and stops dead in its tracks. And when it comes to unstable cutting conditions, the coated PM 60 ONLY ONE, stands up where brittle carbide breaks down. Need a tool to handle tough materials—see how the ONLY ONE can be your best investment at up to 30% less than the cost of carbide.

For more information visit us at http://www.yg1usa.com/