NTK Cutting Tools

The newest addition to the group is JP0 for continuous cuts when finishing HRSA parts and machining at 700 up to 1600 SFM. It brings improved wear resistance to provide performance and consistency of machined part straightness.

CeramiX HX5 Grade

CeramiX HX5 Grade succeeds in matching the performance characteristics of CBN with the added benefit of being a less expensive product compared to CBN. A special TiAlN coating offers excellent wear resistance for hard turning applications.

S-Mill Series Carbide End Mills

The sharpness of these end mills reduces the occurrence of burrs, produces remarkable surface finish, and improves tool life to outperform the competition. S-Mills are available in 2, 3, and 4 flute designs with a range of diameters to cover a wide variety of applications (2 flute available in a 2mm dia.) and in 40, 45, and 50mm lengths that are…

ST4 Grade Carbide Inserts

The thick CrAlN coating provides high hardness and oxidation resistance solving issues related to machining materials such as: 304SS, 17-4PH, and Nitinol. High speed machining applications with ST4 inserts have proven results with stable machining, excellent surface finishes, and extended tool life.

3D Molded Chipbreakers

NTK’s new 3D molded chipbreakers are enhanced to achieve optimal chip control on the company’s Swiss tooling. They include: CTP–CX for cutoff operations, GTMH-GX for grooving or side turning, and TBP/TBPA-BM for “single-pass, back-turning” operations.

High-Feed Cutters

NTK Cutting Tools offers a line of high-feed cutters (HFC) for milling aluminum. This series maximizes teeth/cutter, from seven teeth on the 50mm-dia. cutter to 22 teeth on a 125mm-dia. cutter, to reduce production time.

"BIDEMICS" Grade Inserts

NTK Cutting Tools has released a new proprietary group of advanced composite cutting tool materials called "BIDEMICS."

Articles

+ click to show 4 results

New approach to cutting heat-resistant superalloys

Author:

Kip Hanson

Column:

Feature Article

Published:

September 28, 2017 - 09:00 am

Ceramic surprises

Author:

William Leventon

Column:

Feature Article

Published:

September 9, 2022 - 12:00 pm

All about facemilling

Author:

Frank Burke

Column:

Feature Article

Published:

August 3, 2021 - 23:45 pm

Avoid machining malpractice

Author:

William Leventon

Column:

Feature Article

Published:

October 18, 2021 - 06:00 am

Videos

+ click to show 2 results

BIDEMICS all the buzz at NTK Cutting Tools

During a brief interview at IMTS 2018, Steve Howard, marketing and engineering manager for NTK Cutting Tools, discussed the significance of the company's patented BIDEMICS material, calling it "the first real improvement in ceramics in 20 or 30 years."

Productive Tooling System for Socket Machining

NTK's Shaper Duo tools are effective alternatives to traditional approaches for socket machining