 | Toolholder's concentric clamping enhances tool performance
| SCHUNK introduces the TENDO Platinum toolholder.
| | View Product |
 | Hydraulic and Weldon side-clamping combinations
| ISCAR is introducing
unique chucks that combine user-friendly hydraulic clamping with side screw
clamping for Weldon type shank tools.
| | View Product |
 | CNC 5C collet indexer is for use with Bridgeport-type mills
| Sherline Products Inc. says its CNC 5C collet indexer reduces setup time when used with a Bridgeport-type mill and a 6" angle lock vise.
| | View Product |
 | Shrink collet provides a leap forward in performance
| Bilz Tool Inc. says its TER shrink collet from has proven to be a successful solution in the manufacturing of medical product
technology. One specific application of the TER collet, is for machining vertebral supports from
the titanium alloy Ti6AI4V.
| | View Product |
 | Seco debuts high-performance, high-speed collet chuck
| Seco Tools, debuted the company's
EBP 5672 collet chuck.
| | View Product |
|  | Keeping Concentric
| Author: Alan Richter, Editor
Published: April 2013
The Look Ahead department in the April 2013 issue of Cutting Tool Engineering magazine leads off with a look at a through-coolant, shrink-fit chuck. | View Article
|
 | Good Connections
| Author: Scott Walker, Mitsui Seiki (U.S.A.) Inc., and Mark Huston, Kennametal Inc.
Published: December 2012
The combination of rigid machine tool and strong spindle connection is ideal for cutting titanium. | View Article
|
 | Avoiding Holding Penalties
| Author: Susan Woods, Contributing Editor
Published: July 2012
When selecting toolholders for endmills, a sidelock holder or an ER collet may be the best choice, with alternatives offering a new twist. | View Article
|
 | Speedy Alignment
| Author: Alan Richter, Editor
Published: May 2012
A second Look Ahead feature in the May 2012 issue of Cutting Tool Engineering discusses an automatic toolchanger alignment tool with a dial indicator. | View Article
|
 | Stirring Runout To Zero
| Author: Alan Richter, Editor
Published: February 2012
A hydraulic expansion toolholder that can be adjusted to have zero runout accuracy. | View Article
|
|  | IMTS 2012 Roundup
| | Cutting Tool Engineering offers a full report on the myriad press conferences and media events held during the International Manufacturing Technology Show 2012 at Chicago's McCormick Place. The Sept. 10-15 show attracted nearly 22% more visitors than in 2010. | | View Video |
 | Kennametal Targets Weakest Link
| | Mike Ramsey, vice president of Global MTI Sales at Kennametal Inc., provides an overview of the company's new KM4X spindle connection system, which is said to triple the bending resistance compared to other systems. | | View Video |
 | Creep-feed Grinding
| | Larry Marchand, vice president of the Profile Grinding Technologies Division at United Grinding Technologies, provides a brief look at the company's Mägerle MFP 50, which features an automatic tool changer that enables grinding, milling and drilling in one setup. | | View Video |
 | High-speed Demo
| | Even with a rigid setup, the high cutting forces from driving chips into the T-land face generate small vibrations, which can be seen with Federal-Mogul Corp.’s high-speed video system.
| | View Video |
 | Fast Track Seminars
| | Cutting Tool Engineering and our sister publication MICROmanufacturing hosted a series of Fast Track Seminars at our booth during IMTS 2010 in Chicago. Presented here are a number of the presentations filmed for online distribution.
| | View Video |
|
