Home
(Click to learn more)
Home Subscribe Media Kit Reports Buyers Guide Events Resources Classifieds Contacts Ad Index
(Click to learn more)























AutomationAbrasivesCleaning/
Cleaning Equip.
Cutting ToolsCoatingsCoolantFixtures, WorkholdingGrindingGrinding DocMachine TechnologyMachine ToolsMachine Tools
Accessories/
Controls
Machining Operations, CuttingMachining Operations, RelatedMachinist CornerManagementManagers DeskMaterialsPart TimeProductive TimesQuality ControlSoftwareToolholding2013 Buyers GuideEmail Newsletter Signup

Supplement  
 
(Click to learn more)











Microscope inspects miniature carbide drills
Micro Drill Analyzing Microscope
Measuring Tools/Systems - Micro Drill Analyzing Microscope

Titan Tool Supply Inc.

Address:
68 Comet Ave.
Buffalo, NY 14216

Phone:
716/873-9907

Fax:
716/873-9998

View Web Site
Send an Email

September 2013 - A new $495 Micro Drill Analyzing Microscope from Titan Tool Supply Inc. inspects the geometry, finish and accuracy of new and resharpened miniature carbide drills as small as 1/8" in diameter. Ideal for inspecting the quality of drills used in micromanufacturing and microelectronics, it provides a single-purpose, low-cost alternative to optical comparators and toolmakers microscopes, which entail a significant amount of setup time, according to the company.

Titan Tool's Model MDGA features a 30X magnification lens with a special reticle, two-position viewing, and 360-degree rotation of the drill in a precision collets holder to allow for complete inspection without refocusing or other adjustments. A travel rack and pinion brings the drill into focus.

The new Model MDGA analyzer from Titan Tool enables the user to inspect:

Point Centrality

Hook

Back Taper

Point Angle

Primary Relief Angle

Secondary Relief Angle

Web Taper and Web Thickness

Chisel Edge Angle

Lip Height

Cutting Drill Edge Irregularities and Drill Irregularities

Drill Point Finish

Body-to-Shank Concentricity

The new Titan Micro Drill Geometry Analyzer was designed so that two different views in two different planes of the drill can be inspected without changing setup. View one inspects the side of the drill, capturing all angles and most other adjustments. View two inspects the end of the drill to capture width, thicknesses, flare and other factors. The two different views are obtained by rotating the drill holding fixture 90 degrees on its own axis.

The new inspection tool measures 9-1/2" x 1-1/2" x 2" and weighs 1-lb., 6-oz. It is equipped with two 4mm-dia. Allen head screws for mounting the microscope in a bracket holder, if desired. Shank drills smaller than 1/8" in diameter can be inspected if a spacer (not provided) is used.

View all featured advertisers.

                        
  

Copyright 1995-2014. Cutting Tool Engineering. All rights reserved.