Home

Monitoring Systems

My rConnect

My rConnect Platform Expands Customer Digital Assistance
Now, My rConnect is completely cloud-based, so as long as a computer is connected to the same network as their current GFMS machine, that machine is connected to My rConnect. However, GFMS machines that don’t have network access and are connected to the Internet can also use My rConnect.

Real-time Monitoring of Production Process Quality

Maximizing cost savings and improving product quality are two of the most critical objectives for machining operations. An effective way to achieve these goals is real-time monitoring of production process quality. The Marposs WRSP60 scanning probe measures the profile and surface of newly worked parts quickly and accurately. The tool can automatically define critical measurements like TIR, roundness, and concentricity for rounded parts with a remarkable repeatability of 0.4 microns. Equipped with radio data transmission, the WRSP60 integrates perfectly in lathes and machining centers.

iShield Archive

iShield Archive Memory Card That Protects Sensitive Information
The PC-based "iShield Archive Tool" (iAT) software is used to set up the card. Both the security parameters and user PIN are configured here. Following the initial configuration, iShield Archive securely stores data in the end device and uses hardware AES-256-bit encryption to protect it.

Swissbit Device Manager (SBDM)

Swissbit Device Manager Offers Comprehensive Monitoring and is Enabled for Firmware Updates
The Swissbit Device Manager is the systematic further development of the successful Swissbit Lifetime Monitoring Tool, whose feature set and ease of use have now been expanded even further. All the benefits of a complete monitoring and system tool are provided by the SBDM. This includes both the standard S.M.A.R.T. parameters (Self-Monitoring, Analysis and Reporting Technology) as well as the utilization of the individual flash blocks. Important telemetry data, general device information like serial number or firmware version, utilization statistics like NAND flash erase cycles, and ECC/CRC counters are all visualized using SBDM. The history of all these values is recorded for each memory device.

iQ-R Series System Recorder Module

iQ-R Series System Recorder Module Helps Troubleshoot Difficult or Inconsistent Machine Errors
The system recorder eliminates the ambiguity in diagnosing issues by recording all changes in their programming code for several minutes before and after an event takes place. Users can review the changes that took place in their code leading up to and after the event. In addition, the system recorder allows users to record the data visually, in video format, directly to the module to note environmental conditions that the code cannot see.

TD 110 Tool Breakage Detector

TD 110 is a Fast Reliable In-Process Gage to Check Tools
The TD 110 tool breakage sensor can be placed in the work envelope so that it is fast and easy to reach during the tool change. The inductive sensor can detect tools as they pass by while they are spinning at their operational speed.  Thanks to its rapid scanning technology, even very small tools made of HSS steel and carbide are detected.